View Cart

Allen-Bradley 150-C108NBD Soft Starters Drive

Allen-Bradley 150-C108NBD Soft Starters Drive. NJT Automation sources the 150-C108NBD on request; send the part number for a replacement or repair quote.

Quote required. Request a quote below for pricing and delivery.

Request Replacement QuoteRequest Repair Quote
Part Number150-C108NBD
Price
On Request
Availability and condition determine final quote.
DescriptionAllen-Bradley 150-C108NBD Soft Starters Drive.
Shipping
UPS Ground included | Next-Day Air and Worldwide Shipping available at checkout
Warranty
1-year full-function warranty provided by NJT Automation.
Warranty details
Included
1 year, full-function
2 years
+15% of product price
3 years
+25% of product price
View full warranty policy
Returns
90-day free returns. View return policy
Exchange

Send us your defective 150-C108NBD after your purchase for a 10% core credit. We also purchase old or damaged parts outright.

Availability
Sourced on request

We do not have a 150-C108NBD on the shelf right now. We can source one through our supplier network; request a quote and we confirm availability, price and lead time before you commit.

Sourcing

Sourced through our Level 1 network of vetted US suppliers. Each unit is checked before it ships and carries the same NJT warranty and return policy as our own stock. Quotes within one hour during business hours; typical delivery 3–5 business days, next-day air available. Sourced parts are not available for local pickup.

Request QuoteHow Level 1 sourcing works
Repairs

150-C108NBD Mail-In Repair Service

Intended Use

Designed for large-motor soft start and stop applications. SMC soft starters ramp pumps, fans, compressors, conveyors and crushers up and down to limit inrush current, mechanical shock and water hammer where a full variable-speed drive is not needed.

Allen Bradley Information

Allen Bradley 150-C108NBD is a SMC-3 Smart Motor Controller with a 108A current rating and built-in overload protection.

Technical SpecificationsLifecycle status
LifecycleActive
Verify current status with the manufacturer.

Alternate Part Numbers

150C108NBD, 15O-C1O8NBD
CategorySoft Starters
Part Number150-C108NBD
ManufacturerAllen-Bradley

Can the 150-C108NBD be repaired?

Yes. NJT Automation repairs the 150-C108NBD by mail-in: diagnostic evaluation, component-level repair and a functional test, backed by a 1-year full-function warranty.

NJT managed repair. No evaluation fee; no repair, no charge. Prepaid UPS label both ways, $650 minimum, rush available. 1-year full-function warranty included, 2- and 3-year options.

Get a repair quoteor text photos and symptoms to (414) 331-5954

Prefer an independent shop? Compare bids on RepairMode; providers set their own pricing and warranty.

Find a VFD repair specialiston RepairMode.com ↗

Common 150-C108NBD failures

Failure patterns we regularly see on SMC soft starter hardware like the 150-C108NBD:

  • Control board failure: no display, no response
  • Cooling fan failure and Overtemp trips
  • Line loss / phase loss faults that follow the starter, not the supply
  • Shorted SCR: motor starts across the line or the starter reports Shorted SCR
  • Open gate / gate firing failure: motor will not ramp on one phase

Repair or replace?

ReplaceReplace the 150-C108NBD when the motor is down and a same-rating Soft Starters Drive is on the shelf. Upload the parameters, download them to the new drive, and it is back on the motor. We source the 150-C108NBD on request, so weigh that lead time against a repair turnaround.
RepairRepair the 150-C108NBD when a replacement is hard to source or the rating is large enough that a rebuild is clearly cheaper. Power modules, bus capacitors, precharge resistors and fans are replaced and the drive is run under load before it ships back. Most 150-C108NBD units reach our bench with one of two symptoms: “Shorted SCR” or “Open gate / gate firing failure”. Already swapped it out? Repairing the failed 150-C108NBD turns it into a tested spare on the shelf for the next failure. Every 150-C108NBD repair is fully function-tested and covered by a 1-year warranty.
Related services:All Repair Services

Photos by NJT Automation; test videos from NJT or network repair technicians.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The 150-C108NBD is available in Unused surplus / Refurbished / Used condition. We can quote this part in unused surplus, refurbished, or used condition depending on availability and your preference. Specify your requirement in the RFQ.
The 150-C108NBD is sourced on request. Request a quote and we'll confirm availability and lead time, typically a few business days.
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.