View Cart

Allen-Bradley 2198-H070-ERS2 Kinetix 5500 – Ready to Ship / Pick Up

In stock: The 2198-H070-ERS2 is a Kinetix 5500 EtherNet/IP servo drive, 23 A rms continuous, 14.6 kW at 480V, Frame 3, integrated (CIP Safety) Safe Torque Off. NJT Automation has 1 unit available in Milwaukee, WI, ready to ship or available for local pickup. Includes a one-year full-function warranty.

Allen-Bradley 2198-H070-ERS2 Kinetix 5500 servo drive, 14.6 kW, 480V AC – front view

$2,199.99USD

Request Repair QuoteEstimated $1,440.00
DescriptionKinetix 5500 servo drive, 14.6 kW, 480V AC. In stock in used condition.
ShippingShips today UPS Ground included | Next-Day Air and Worldwide Shipping available at checkout
PickupFree local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty1-year full-function warranty provided by NJT Automation.
Warranty details

The original Allen-Bradley warranty does not apply to pre-owned units. Full warranty coverage is provided directly by NJT Automation. If you have any issues we can usually swap your unit next-day air (based on inventory)-no waiting weeks for a repair.

Included: 1 Year
+1 Year: +15% of product price ($330.00)
+2 Years: +25% of product price ($550.00)
View Full Warranty Policy
Returns90-day free returns on all purchases.View return policy
Exchange

Send us your defective 2198-H070-ERS2 after your purchase for a 10% core credit. We also purchase old or damaged parts outright.

Replacement Options for 2198-H070-ERS2

In stock and ready to ship today

Allen Bradley 2198-H070-ERS2 Kinetix 5500 Servo Drive 23A 190-528V 2198H070ERS2

$2,199.99 USDIn-stock match

Condition: Used

1 in stock

View Product
Availability
Similar Match Available

A similar unit is in stock and ready to ship once you confirm the condition you need.

Variants
Part NumberConditionSeriesQtyPrice
2198-H070-ERS2Used1$2,199.99 USD
Repairs

2198-H070-ERS2 Mail-In Repair Service

Estimated: $1,440.00

Part Number Decoder

Kinetix 5500 servo drive
2198H070ERS2

Kinetix 5500 EtherNet/IP servo drive, 23 A rms continuous, 14.6 kW at 480V, Frame 3, integrated (CIP Safety) Safe Torque Off.

2198
BulletinKinetix 5500: Allen-Bradley's compact EtherNet/IP servo drive with integrated motion (CIP Motion), single-cable motor connection and shared AC/DC bus; pairs with VPL / VPF / VPS Kinetix VP motors.
H070
Output rating23 A rms continuous output current; 14.6 kW at 480V three-phase, 7 kW at 240V three-phase. Frame 3 drive.
195-528V AC
Input voltage480V AC nominal three-phase input (195…528V AC range, 200/230/400/480V systems), 24V DC control power.
ERS2
SafetyIntegrated Safe Torque Off over EtherNet/IP (CIP Safety) from a GuardLogix controller, PLe / SIL 3.
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Similar Part Numbers

  • 2198-H008-ERS Output rating: 2.5 A rms continuous output current; Safety: Hardwired Safe Torque Off (STO) via the
  • 2198-H015-ERS Output rating: 5 A rms continuous output current; 3.2; Safety: Hardwired Safe Torque Off (STO) via the
  • 2198-H025-ERS Output rating: 8 A rms continuous output current; 5.1; Safety: Hardwired Safe Torque Off (STO) via the
  • 2198-H040-ERS Output rating: 13 A rms continuous output current; 8.3; Safety: Hardwired Safe Torque Off (STO) via the

Allen Bradley Information

Technical Description
Allen-Bradley Kinetix 5500 Servo Drive 2198-H070-ERS2, 7.0 A continuous output current, dual Ethernet ports, and integrated safety features
Lifecycle: Active — verify current status with the manufacturer

Alternate Part Numbers

2198H070ERS2, 2198 HO7OERS2
CategoryKinetix 5500
UPC / GTIN0885630903361
Part Number2198-H070-ERS2
ManufacturerAllen-Bradley
Previously sold 2198-H070-ERS21 sold

NJT Automation has supplied and shipped one 2198-H070-ERS2 Kinetix 5500 servo drive. These listings are sold; the in-stock options above are ready to ship.

Allen-Bradley 2198-H070-ERS2 Unused surplus (new old stock) - previously sold by NJT AutomationSold

2024 Allen Bradley 2198-H070-ERS2 Ser A Kinetix 5500 Servo Drive - Open Box

$2,479.99 USD

Unused surplus (new old stock)

Request Quote

Can the 2198-H070-ERS2 be repaired?

Yes. NJT Automation offers mail-in repair for the 2198-H070-ERS2, including diagnostic evaluation, component-level repair, and functional testing.

NJT Managed Repair

One vendor. One warranty. NJT manages the entire process.

  • 1-year full-function NJT warranty, with 2- and 3-year options available
  • Rush service available for production-critical repairs
  • No evaluation or diagnostic charges
  • No repair, no charge
  • Pre-paid UPS shipping label provided for sending your unit in
  • $650 minimum repair charge, shipping included both ways
Get an NJT Repair Quote

Looking for another option? For lower-cost repairs or if you prefer to work directly with an independent repair specialist, compare bids through RepairMode. RepairMode providers operate independently and set their own pricing and warranty terms.

Find a servo drive repair specialiston RepairMode.com ↗

Common 2198-H070-ERS2 failures

Failure patterns we regularly see on Kinetix 5500 servo drive hardware like the 2198-H070-ERS2:

  • Safe Torque Off (STO) faults from safety wiring or the STO circuit
  • Bus undervoltage / overvoltage faults from weak incoming power or regen energy
  • Ethernet port failure: drive drops off the CIP Motion connection or DLR ring
  • Motor feedback faults from the DSL / feedback connector or a failed feedback interface
  • Power stage failure after a motor or cable short
  • Cooling fan failure and overtemperature trips

Repair or replace?

ReplaceReplace the 2198-H070-ERS2 when an axis is down and a matching Kinetix 5500 servo drive is available. The drive is set up from the Logix project, so you need the right firmware and the same safety and feedback options in the catalog suffix. Stick with the exact 2198-H070-ERS2. The suffix sets the 14.6 kW, 480V AC rating, so a near match is a different unit. We stock the 2198-H070-ERS2. Order by 5:00 PM Central for same-day shipping.
RepairServo drives fail in the power stage, bus capacitors, precharge circuit and fans, all of which are repairable on the 14.6 kW 2198-H070-ERS2 and load-tested with a motor before return. Repair pays when the axis is part of a shared-bus system you do not want to disturb. Most 2198-H070-ERS2 units reach our bench with one of two symptoms: “Safe Torque Off (STO) faults” or “Bus undervoltage / overvoltage faults”. Already swapped it out? Repairing the failed 2198-H070-ERS2 turns it into a tested spare on the shelf for the next failure. Expect estimated $1,440.00 for the 2198-H070-ERS2 repair, with full-function testing and a 1-year warranty included.

Why Choose Our Repair Service?

  • ■ Rush turnaround available, with 24-hour emergency service on some models
  • ■ 1-year full-function warranty, with 2- and 3-year extended options
  • ■ No evaluation or diagnostic charges
  • ■ Free UPS shipping label available
  • ■ "Unrepairable" is not an option
  • ■ Thousands of successful Allen-Bradley restorations

Request a Repair Quote

Ready to repair your 2198-H070-ERS2? Request a repair quote below. For immediate assistance, text photos of your faulty unit and a description of the symptoms to (414) 331-5954.

Start Your Repair Today

All product photos were taken by NJT Automation. Test videos originated from either NJT Automation internally or from repair technicians within our network.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The Allen-Bradley 2198-H070-ERS2 is a Kinetix 5500 EtherNet/IP servo drive, 23 A rms continuous, 14.6 kW at 480V, Frame 3, integrated (CIP Safety) Safe Torque Off.
The 2198-H070-ERS2 is available in Used condition. Clean used pull with full functionality. Minimal cosmetic wear and backed by our 1-year warranty.
We have 2198-H070-ERS2 units in stock in Milwaukee, WI. Orders placed before 5:00 PM Central on business days ship the same day; orders placed after the cutoff ship the next business day.
Yes. UPS Next Day Air is available at checkout for the 2198-H070-ERS2. Place your order before 5:00 PM Central on a business day and your in-stock item ships the same day for next-business-day delivery.
Yes. Free local pickup is available for in-stock 2198-H070-ERS2 units at NJT Automation, 2122 N Prospect Ave, Milwaukee, WI, during business hours. Contact us to arrange a pickup time.
480V AC nominal three-phase input (195…528V AC range, 200/230/400/480V systems), 24V DC control power.
23 A rms continuous output current; 14.6 kW at 480V three-phase, 7 kW at 240V three-phase.
2198-H070-ERS2 breaks down as: 2198 = Kinetix 5500; H070 = 23 A rms continuous output current; 14.6 kW at 480V three-phase, 7 kW at 240V three-phase; 195-528V AC = 480V AC nominal three-phase input (195…528V AC range; ERS2 = Integrated Safe Torque Off over EtherNet/IP (CIP Safety) from a GuardLogix controller.
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.