View Cart

Allen-Bradley 2711P-T12W21D8S PanelView Plus 7 12.1-in. Touch, 24V DC

In stock: 4 units in Milwaukee, WI.

PanelView Plus 7 Standard 12.1-in. widescreen color TFT touch terminal · single Ethernet port · 24V DC powered

Starting at

$1,999.99USDUsed, Series CView listing

Used and refurbished options available below

Request Repair QuoteEstimated $1,295.00
Part Number2711P-T12W21D8S
DescriptionPanelView Plus 7 Standard touch terminal, 12.1-in. Touch, 24V DC. In stock in used and refurbished condition, Series C and D.
Shipping
Ships same or next business day
UPS Ground
Included. Next-Day Air and worldwide shipping available.
Courier
Within 350 miles, est. $3.50/mile, subject to availability.
Pickup
Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty
1-year full-function warranty provided by NJT Automation.
Warranty details
Included
1 year, full-function
2 years
+15% of product price (from $300.00)
3 years
+25% of product price (from $500.00)
View full warranty policy
Returns
90-day free returns. View return policy
Exchange

Send in your defective 2711P-T12W21D8S for a 10% core credit.

Replacement 2711P-T12W21D8S Options

Allen-Bradley 2711P-T12W21D8S PanelView Plus 7 Excellent Cond.

$1,999.99 USDIn-stock match

Condition: Used

Series C

1 in stockView details

Allen-Bradley 2711P-T12W21D8S PanelView Plus 7 12.1" Touch

$2,299.99 USDIn-stock match

Condition: Used

Series D

1 in stockView details
Variants
Part NumberConditionSeriesQtyPrice
2711P-T12W21D8S /C$1,999.99
Used · Series C · 1 in stock
2711P-T12W21D8S /CUsedSeries C1$1,999.99 USD
2711P-T12W21D8S /D$2,299.99
Used · Series D · 1 in stock
2711P-T12W21D8S /DUsedSeries D1$2,299.99 USD
2711P-T12W21D8S /D$2,499.99
Used · Series D · 1 in stock
2711P-T12W21D8S /DUsedSeries D1$2,499.99 USD
2711P-T12W21D8S /C$2,599.99
Refurbished · Series C · 1 in stock
2711P-T12W21D8S /CRefurbishedSeries C1$2,599.99 USD

2711P-T12W21D8S

Refurbished — pick series, then request a quote

Request Quote
2711P-T12W21D8SRefurbished—Request Quote
Availability
4 Units in StockIndependently SourcedNot an OEM-Authorized Distributor
Repairs

2711P-T12W21D8S Mail-In Repair Service

Estimated: $1,295.00

Part Number Decoder

PanelView Plus 7 Standard touch terminal
2711PT12WW21D8S
2711P
BulletinPanelView Plus: Allen-Bradley's FactoryTalk View Machine Edition HMI terminal family (PanelView Plus, Plus CE, Plus 6 and Plus 7).
T
Operator inputTouch screen: analog resistive touch, no keypad.
12W
Display size12.1-in. widescreen (1280 x 800) display.
W
Display typeWidescreen color TFT LCD (the W replaces the C on wide-format models).
21
Ethernet portsOne 10/100Base-T Ethernet port (IEEE 1588 capable).
D
Power24V DC power input (18…30V DC).
8
Operating systemWindows CE 6.0 (Standard models): FTP server, VNC server, ActiveX controls and PDF reader, without the extended features.
S
ModelStandard model: FactoryTalk View ME without the extended features; 512 MB RAM, 512 MB storage (about 80 MB free for applications).
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Series & Revisions

Series C and D in stock; other series on request.

Series notes: Same cutout and connections across series; confirm the replacement's firmware supports the project's FactoryTalk View ME version.

Intended Use

Designed for machine operator interface (HMI) applications. PanelView Plus 7 terminals with a 12.1-in. display give operators graphics, alarms and trends for packaging, food and beverage, pharmaceutical, automotive and water applications, communicating with Logix controllers over EtherNet/IP and running FactoryTalk View ME applications.

Physical Data

Weight and DimensionsWeight4.30 lb (1.95 kg)H × W × D9.7 × 13.4 × 2.2 in. (246 × 340 × 56.5 mm)
Weight1.95 kg (4.30 lb)
Typical unit weight
Dimensions (H × W × D)246 × 340 × 56.5 mm (9.7 × 13.4 × 2.2 in.)
12.1-in. widescreen touch terminal
Shipping Weight3.43 kg (7.55 lb)
Estimated: unit weight plus box and packing material; bills as 8 lb
Shipping Box (L × W × H)20 × 16 × 12 in. (508 × 406 × 305 mm)
Smallest standard box fitting the product with 3 in. cushioning per side
Product weight and dimensions are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Similar Part Numbers

  • 2711P-T9W21D8S Display size: 9-in. widescreen (800 x 480) display
  • 2711P-T12W22D8S Ethernet ports: Two 10/100Base-T Ethernet ports with embedded switch
  • 2711P-T10C21D8S Display size: 10.4-in. (800 x 600) display; Display type: Color TFT LCD
  • 2711P-T15C21D8S Display size: 15-in. (1024 x 768) display; Display type: Color TFT LCD
  • 2711P-T6C21D8S Display size: 5.7-in. (640 x 480) display; Display type: Color TFT LCD
CategoryPanelView Plus
UPC / GTIN887172715433
Part Number2711P-T12W21D8S
ManufacturerAllen-Bradley

2711P-T12W21D8S Sales History

2 sold

NJT Automation has supplied and shipped 2 2711P-T12W21D8S PanelView Plus 7 Standard touch terminals since 2024; these listings are sold and the in-stock options above are ready to ship.

Sold
2 since 2024
Series
B × 1, C × 1
Allen-Bradley 2711P-T12W21D8S Unused surplus (open box) - previously sold by NJT AutomationSold

Allen-Bradley PanelView Plus 7 Standard 2711P-T12W21D8S

$1,499.99 USD

Unused surplus (open box)

Request Quote

Can the 2711P-T12W21D8S be repaired?

Yes. NJT Automation repairs the 2711P-T12W21D8S by mail-in: diagnostic evaluation, component-level repair and a functional test.

Option 1

NJT Managed Repair

Evaluation
Free evaluation.
Shipping
Free UPS shipping both ways, including unrepairable returns. Local drop-off and pickup available.
Pricing
$650 minimum for successful repairs.
Warranty
1-year full-function warranty included. 2- and 3-year options available.
Get a repair quoteOr text photos and symptoms to (414) 331-5954

Option 2

Independent repair bids. Compare quotes from independent repair technicians. Post your repair on RepairMode to receive competitive bids from experienced technicians. Each technician sets their own pricing and warranty.

View completed 2711P-T12W21D8S repairson RepairMode.com ↗

Common Failures

Failure patterns we regularly see on PanelView Plus 7 Standard touch terminal hardware like the 2711P-T12W21D8S:

  • No power LED or resets under load after a 24V DC surge or brownout: failed electrolytic capacitors or input protection on the power supply board
  • White, blank or scrambled screen while the terminal still communicates on Ethernet: LCD panel, LVDS cable or display driver failure
  • Vertical or horizontal lines, dead pixels or image retention on the LCD
  • Cracked bezel or compressed gasket letting washdown or oil mist corrode the boards
  • Firmware or storage corruption after a power loss during a write, requiring a re-image

Fault code reference

2711P-T12W21D8S Fault Codes

6 codes · 2711P-UM007

Fault codes a PanelView Plus 7 Standard touch terminal reports on the start-up screen (shown as Fatal followed by a two-character code) and the ERR (red) and STS (green) indicators on the back of the terminal, as documented in Rockwell Automation publication 2711P-UM007. Use them to narrow a problem down to the unit, its wiring or the application before sending it in for repair.

Fatal start-up codes

2711P-T12W21D8S Fatal start-up codes
CodeFailureWhat it indicates
Fatal 02Watchdog errorA watchdog reset occurred. By default the terminal shows the error at start-up and halts at the maintenance window instead of booting the application; monitor for recurrence.
Fatal 3AStuck touchThe start-up self-test found a touch cell held or stuck. Make sure nothing is pressing on the screen (including a damaged anti-glare overlay) and reset the terminal without touching it; if it persists, the fault is in the touch screen / display assembly.

Fatal 02 is documented in 2711P-UM007 / UM008; Fatal 3A on PanelView Plus 7 is documented in the Rockwell Knowledgebase article "PanelView Plus Fatal 3A at Boot up", which covers all PanelView Plus, Plus 6 and Plus 7 touch models.

Status indicator states during start-up

2711P-T12W21D8S Status indicator states during start-up
IndicatorsStateWhat it indicates
ERR blinking · STS offRecoverable firmware error / configuration failureReload the firmware or restore the terminal to its factory default image.
ERR on · STS onFatal hardware errorA hardware fault inside the terminal that a reset or firmware reload will not clear.
ERR on · STS blinkingFatal display hardware errorA hardware fault in the terminal's display section that a reset or firmware reload will not clear.
ERR off · STS offNo powerIndicators flash at start-up and STS stays on after a successful boot; if both stay off, check the power cable and supply.

Where the manual's only remedy for a code is to replace the unit or module, the code is pointing at a hardware fault inside that part. Those are the faults NJT Automation repairs at component level, so a repair quote is usually the first thing to check before buying a replacement.

Source: Rockwell Automation publication 2711P-UM007, PanelView Plus 7 Standard Terminals User Manual. Codes are listed as documented; fault behaviour can vary by firmware revision, so confirm against the manual for your unit's series.

Functional test video

Bench test from a completed 2711P-T12W21D8S repair.

RepairMode test video for 2711P-T12W21D8S

Open the test video page

Photos by NJT Automation; test videos from NJT or network repair technicians.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The Allen-Bradley 2711P-T12W21D8S is a PanelView Plus 7 Standard 12.1-in. widescreen color TFT touch terminal, single Ethernet port, 24V DC powered.
NJT Automation currently has 4 units of the 2711P-T12W21D8S in stock in used and refurbished condition (Series C and D). Each listing states its own condition and series. Refurbished means a previously used unit that has been restored to working order before sale. The inspection, repairs and testing performed on a given unit, and its warranty term, are stated on that unit’s own listing. Used means a unit removed from service and sold without refurbishment. Cosmetic condition, any functional testing performed, and the warranty term are stated on each unit’s own listing.
The 2711P-T12W21D8S starts at $1,999.99 (Used, Series C) at NJT Automation. 4 units are in stock; other conditions and series are priced individually in the options above. 2 2711P-T12W21D8S PanelView Plus 7 Standard touch terminals have sold since 2024.
4 units of the 2711P-T12W21D8S PanelView Plus 7 Standard touch terminal are on the shelf in Milwaukee, WI. Orders before 5:00 PM Central on a business day ship the same day; next-day air is available at checkout.
12.1-in. widescreen (1280 x 800) display.
24V DC power input (18…30V DC).
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.