View Cart

Allen-Bradley 2711PC-T6C20D8 PanelView Plus 6 5.7-in. Touch, 24V DC

In stock: 4 units in Milwaukee, WI.

PanelView Plus 6 Compact 5.7-in. color touch terminal · Ethernet + RS-232 · 24V DC powered

Starting at

$1,199.99USDUsed, Series AView listing

Used and refurbished options available below

Request Repair QuoteEstimated $1,295.00
Part Number2711PC-T6C20D8
DescriptionPanelView Plus 6 Compact touch terminal, 5.7-in. Touch, 24V DC. In stock in used and refurbished condition, Series A.
Shipping
Ships same or next business day
UPS Ground
Included. Next-Day Air and worldwide shipping available.
Courier
Within 350 miles, est. $3.50/mile, subject to availability.
Pickup
Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty
1-year full-function warranty provided by NJT Automation.
Warranty details
Included
1 year, full-function
2 years
+15% of product price (from $180.00)
3 years
+25% of product price (from $300.00)
View full warranty policy
Returns
90-day free returns. View return policy
Exchange

Send in your defective 2711PC-T6C20D8 for a 10% core credit.

Replacement 2711PC-T6C20D8 Options

Allen-Bradley 2711PC-T6C20D8 PanelView Plus Compact 600 24VDC 15W HMI

$1,199.99 USDIn-stock match

Condition: Used

Series A

1 in stockView details

Allen-Bradley 2711PC-T6C20D8 PanelView Plus 6 Compact 600 Touch 24VDC

$1,199.99 USDIn-stock match

Condition: Used

Series A

1 in stockView details
Variants
Part NumberConditionSeriesQtyPrice
2711PC-T6C20D8 /A$1,199.99
Used · Series A · 1 in stock
2711PC-T6C20D8 /AUsedSeries A1$1,199.99 USD
2711PC-T6C20D8 /A$1,199.99
Used · Series A · 1 in stock
2711PC-T6C20D8 /AUsedSeries A1$1,199.99 USD
2711PC-T6C20D8 /A$1,799.99
Refurbished · Series A · 1 in stock
2711PC-T6C20D8 /ARefurbishedSeries A1$1,799.99 USD
2711PC-T6C20D8 /A$1,899.99
Used · Series A · 1 in stock
2711PC-T6C20D8 /AUsedSeries A1$1,899.99 USD

2711PC-T6C20D8

Refurbished — pick series, then request a quote

Request Quote
2711PC-T6C20D8Refurbished—Request Quote
Availability
4 Units in StockIndependently SourcedNot an OEM-Authorized Distributor
Repairs

2711PC-T6C20D8 Mail-In Repair Service

Estimated: $1,295.00

Part Number Decoder

PanelView Plus 6 Compact touch terminal
2711PCT6C20D8
2711PC
BulletinPanelView Plus Compact: fixed-configuration PanelView Plus / Plus 6 terminals (Ethernet and serial only, no add-on communication modules).
T
Operator inputTouch screen: analog resistive touch, no keypad.
6
Model / sizeCompact 600 model: 5.7-in. display.
C
Display typeColor display (active-matrix TFT on 700…1500; color STN/TFT on 400/600).
20
CommunicationEthernet (10/100 Mbps) and RS-232 serial, one USB host and one USB device port; add-on modules not supported.
D
Power24V DC power input (18…30V DC).
8
Operating system / featuresWindows CE 6.0 with standard features (FTP, VNC, ActiveX), without the extended features or Microsoft Office file viewers.
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Series & Revisions

Series A in stock; other series on request.

Series notes: Same cutout and connections across series; confirm the replacement's firmware supports the project's FactoryTalk View ME version.

Intended Use

Built for standalone machine operator interface applications. PanelView Plus Compact terminals run a single-controller FactoryTalk View ME application on OEM machines and small cells where a full PanelView Plus is more than the job needs.

Physical Data

Weight and DimensionsWeight1.74 lb (0.79 kg)H × W × D6 × 7.3 × 3.9 in. (152 × 185 × 98 mm)
Weight0.79 kg (1.74 lb)
Typical unit weight
Dimensions (H × W × D)152 × 185 × 98 mm (6 × 7.3 × 3.9 in.)
600 touch terminal
Shipping Weight1.51 kg (3.33 lb)
Estimated: unit weight plus box and packing material; bills as 4 lb
Shipping Box (L × W × H)14 × 12 × 10 in. (356 × 305 × 254 mm)
Smallest standard box fitting the product with 3 in. cushioning per side
Product weight and dimensions are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Allen-Bradley Information

Technical Specifications9 parameters from manufacturer-published specifications
LifecycleDiscontinued
Verify current status with the manufacturer.
Terminal familyPanelView Plus 6 Compact 600
Display5.7-in. color TFT, 320 × 240, 18-bit color
Brightness440 nits
Operator inputAnalog resistive touch screen
Memory256 MB RAM; 512 MB nonvolatile storage (73 MB available for applications)
Communication1 × Ethernet 10/100 Mbps; 1 × RS-232; 1 × USB host; 1 × USB device
SoftwareFactoryTalk View Machine Edition v6.10 or later; Windows CE 6.0 (extended features not supported)
Input power24V DC nominal; 15 W max
Weight, approx.594 g
Typical manufacturer-published values for this catalog number; confirm against the current manufacturer documentation before specifying.
CategoryPanelView Plus
UPC / GTIN884951344471
Part Number2711PC-T6C20D8
ManufacturerAllen-Bradley

2711PC-T6C20D8 Sales History

5 sold · +3 on eBay

NJT Automation has supplied and shipped 5 2711PC-T6C20D8 PanelView Plus 6 Compact touch terminals since 2024; these listings are sold and the in-stock options above are ready to ship.

Sold
5 since 2024
Series
A × 5
Allen-Bradley 2711PC-T6C20D8 Unused surplus (open box) - previously sold by NJT AutomationSold

Allen-Bradley 2711PC-T6C20D8 PanelView Plus 600 Touch (0 Runtime)

$2,199.99 USD

Unused surplus (open box)

Request Quote
3 sold on eBay

Can the 2711PC-T6C20D8 be repaired?

Yes. NJT Automation repairs the 2711PC-T6C20D8 by mail-in: diagnostic evaluation, component-level repair and a functional test.

Option 1

NJT Managed Repair

Evaluation
Free evaluation.
Shipping
Free UPS shipping both ways, including unrepairable returns. Local drop-off and pickup available.
Pricing
$650 minimum for successful repairs.
Warranty
1-year full-function warranty included. 2- and 3-year options available.
Get a repair quoteOr text photos and symptoms to (414) 331-5954

Option 2

Independent repair bids. Compare quotes from independent repair technicians. Post your repair on RepairMode to receive competitive bids from experienced technicians. Each technician sets their own pricing and warranty.

View completed 2711PC-T6C20D8 repairson RepairMode.com ↗

Common Failures

Failure patterns we regularly see on PanelView Plus 6 Compact touch terminal hardware like the 2711PC-T6C20D8:

  • Backlight dim or dark with the terminal still running: aged CCFL tubes or a failed inverter board
  • Ethernet or RS-232 port dead or dropping the PLC connection after a surge
  • Overlay scratched or peeling at the corners
  • No power LED or random resets: failed electrolytic capacitors on the power supply board
  • Lines, dead pixels or a washed-out image: LCD panel or ribbon-cable fault

Fault code reference

2711PC-T6C20D8 Fault Codes

19 codes · 2711P-UM006

Fault codes a PanelView Plus 6 Compact touch terminal reports on the start-up splash screen (shown as Fatal followed by a two-character code, for example Fatal 3A) and the Fault (red) and Comm (green) indicators, as documented in Rockwell Automation publication 2711P-UM006. Use them to narrow a problem down to the unit, its wiring or the application before sending it in for repair.

Fatal start-up codes

2711PC-T6C20D8 Fatal start-up codes
CodeFailureWhat it indicates
Fatal 02Watch dog resetA momentary loss of control due to a software failure. The terminal halts at the maintenance window; monitor for recurrence.
Fatal 03Failed RAMPOST failure in the terminal's RAM; a hardware fault in the logic module (700…1500) or the terminal's logic board (400/600).
Fatal 0FFirmware update failureFatal during firmware loading. Reset from the maintenance menu, restore factory defaults or reinstall firmware.
Fatal 1EFirmware validation (CRC/format) failureFatal during firmware loading (1E also appears as a normal 'Update' progress code). Reset, restore defaults or reinstall firmware.
Fatal 1FFirmware compatibility index failureFirmware failed to validate the compatibility index of a firmware region; reinstall the correct firmware.
Fatal 31Stuck keyPOST found a function key held or stuck. Make sure nothing presses on the keypad and reset the terminal without touching any key; if it persists, the fault is in the keypad / display module.
Fatal 3AStuck touchPOST found a touch cell held or stuck. Make sure nothing is pressing on the screen (including a damaged anti-glare overlay), then reset without touching it; if it persists, the fault is in the touch screen / display module.
Fatal 3BFailed backlightPOST could not start the backlight; a hardware fault in the display module. If 3A or 3B appears right after an LED-backlit (newer series) display module was fitted to an older logic module, check the logic module firmware first (2711P-IN030 requires 7.00.20 or later for LED displays on Plus 6).
Fatal A5Firmware write to storage failureFatal during firmware loading (A5 also appears as a normal 'Update/Restore' progress code). Reset, restore defaults or reinstall firmware.
Fatal D2Firmware stored image verification failureFatal during firmware loading; reset, restore defaults or reinstall firmware.
Show 6 more codes
Fatal FFInvalid or missing OS firmware imageNo valid operating system image (FF also appears as a normal 'AutoTest' progress code). Reinstall firmware.
Fatal R0Failed to initialize restore operationFatal during a restore; reset the terminal from the maintenance menu.
Fatal R1Invalid header in .pvb fileFatal during a restore; the backup file header is invalid.
Fatal R2Invalid headerFatal during a restore.
Fatal R3Cannot write intermediate filesFatal during a restore; the terminal could not write intermediate files.
Fatal R4Corrupt .pvb fileFatal during a restore; the backup file is corrupt.

The splash screen shows the state word and the code together, for example "Fatal 3A". Codes shown with the state AutoTest, Boot, Init, Update or Restore (E6, FF, G0, H1–JA, K1–MA, 1E, A5, DC) are normal progress messages; only codes shown with the state Fatal are errors. Rockwell Knowledgebase 459615 reproduces this list.

Status indicator states if the terminal stops during start-up

2711PC-T6C20D8 Status indicator states if the terminal stops during start-up
IndicatorsStateWhat it indicates
Fault blinking · Comm offRecoverable firmware errorLast firmware download failed. Reload the firmware with the Firmware Upgrade Wizard.
Fault on · Comm offNon-recoverable logic module faultHardware fault in the logic module (700…1500) or the terminal's logic board (400/600); not recoverable by a reset or firmware reload.
Fault on · Comm blinkingNon-recoverable display module faultHardware fault in the display module (700…1500) or the terminal's display section (400/600); not recoverable by a reset or firmware reload.

Where the manual's only remedy for a code is to replace the unit or module, the code is pointing at a hardware fault inside that part. Those are the faults NJT Automation repairs at component level, so a repair quote is usually the first thing to check before buying a replacement.

Source: Rockwell Automation publication 2711P-UM006, PanelView Plus 6 Terminals User Manual. Codes are listed as documented; fault behaviour can vary by firmware revision, so confirm against the manual for your unit's series.

Photos by NJT Automation; test videos from NJT or network repair technicians.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The Allen-Bradley 2711PC-T6C20D8 is a PanelView Plus 6 Compact 5.7-in. color touch terminal, Ethernet + RS-232, 24V DC powered.
NJT Automation currently has 4 units of the 2711PC-T6C20D8 in stock in used and refurbished condition (Series A). Each listing states its own condition and series. Refurbished means a previously used unit that has been restored to working order before sale. The inspection, repairs and testing performed on a given unit, and its warranty term, are stated on that unit’s own listing. Used means a unit removed from service and sold without refurbishment. Cosmetic condition, any functional testing performed, and the warranty term are stated on each unit’s own listing.
The 2711PC-T6C20D8 starts at $1,199.99 (Used, Series A) at NJT Automation. 4 units are in stock; other conditions and series are priced individually in the options above. 5 2711PC-T6C20D8 PanelView Plus 6 Compact touch terminals have sold since 2024.
4 units of the 2711PC-T6C20D8 PanelView Plus 6 Compact touch terminal are on the shelf in Milwaukee, WI. Orders before 5:00 PM Central on a business day ship the same day; next-day air is available at checkout.
24V DC power input (18…30V DC).
Touch screen: analog resistive touch, no keypad.
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.