View Cart

Allen-Bradley 1769-L36ERMS CompactLogix Processor 3 MB, Dual EtherNet/IP

In stock: 1 unit in Milwaukee, WI.

Compact GuardLogix 5370 L3 controller · 3 MB user memory + 1.5 MB safety · dual EtherNet/IP ports · 48 nodes · 30 Compact I/O (1769) modules in 3 banks

Price

$1,999.99USDRefurbished, Series BView listing

Request Repair QuoteEstimated $1,440.00
Part Number1769-L36ERMS
DescriptionCompact GuardLogix 5370 L3 controller, 3 MB, Dual EtherNet/IP. In stock in refurbished condition, Series B.
Shipping
Ships same or next business day
UPS Ground
Included. Next-Day Air and worldwide shipping available.
Courier
Within 350 miles, est. $3.50/mile, subject to availability.
Pickup
Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty
1-year full-function warranty provided by NJT Automation.
Warranty details
Included
1 year, full-function
2 years
+15% of product price ($300.00)
3 years
+25% of product price ($500.00)
View full warranty policy
Returns
90-day free returns. View return policy
Exchange

Send in your defective 1769-L36ERMS for a 10% core credit.

Variants
Part NumberConditionSeriesQtyPrice
1769-L36ERMS /B$1,999.99
Refurbished · Series B · 1 in stock
1769-L36ERMS /BRefurbishedSeries B1$1,999.99 USD

1769-L36ERMS

Refurbished — pick series, then request a quote

Request Quote
1769-L36ERMSRefurbished—Request Quote
Availability
1 Unit in StockIndependently SourcedNot an OEM-Authorized Distributor
Repairs

1769-L36ERMS Mail-In Repair Service

Estimated: $1,440.00

Part Number Decoder

Compact GuardLogix 5370 L3 controller
1769L36ERMS48
1769
BulletinCompactLogix / Compact I/O: Rockwell Automation's rack-less, DIN-rail Logix platform. 1769 controllers, I/O modules, power supplies and adapters snap together on a shared backplane bus.
L36
ControllerCompact GuardLogix 5370 L3 controller (L36 class).
ER
CommunicationDual EtherNet/IP ports (linear / device-level-ring topologies), USB programming port, SD card slot.
3 MB
Memory size3 MB of standard user memory plus 1.5 MB of safety memory.
M
MotionIntegrated Motion on EtherNet/IP: up to 16 CIP Drive (position-loop) axes.
S
SafetyGuardLogix safety controller: SIL 3 / PLe / Cat. 4 safety and standard control in one unit.
48
NetworkSupports up to 48 EtherNet/IP nodes; 30 Compact I/O (1769) modules in 3 banks.
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Series & Revisions

Series B in stock; other series on request.

Series notes: Logix keys on catalog number and firmware revision, not series; with the default Compatible Module keying, any series of the same catalog number is accepted in the slot.

Intended Use

Built for machine-level control applications. CompactLogix controllers run packaging machines, palletizers, conveyors, material handling, small process skids and OEM equipment where a mid-size Logix controller with local I/O fits in the machine panel and programs in Studio 5000 like the rest of the plant. Safety-rated for use in GuardLogix safety chains up to SIL 3 / PLe.

Physical Data

Weight and DimensionsWeight1.46 lb (0.66 kg)
Weight0.66 kg (1.46 lb)
Typical unit weight, CompactLogix 5370 controller; 1769-L24ER-QB1B 0.63 kg
Shipping Weight1.11 kg (2.45 lb)
Estimated: unit weight plus box and packing material; bills as 3 lb
Shipping Box (L × W × H)12 × 10 × 8 in. (305 × 254 × 203 mm)
Most common box recorded for this catalog number
Product weight are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Allen-Bradley Information

Technical Specifications10 parameters from manufacturer-published specifications
Controller familyCompact GuardLogix 5370
Standard memory3 MB
Safety memory1.5 MB
Safety ratingTÜV certified, capable of SIL 3 (IEC 61508); Category 4 / PLe (EN ISO 13849-1)
EtherNet/IP nodes supported48
Local expansion I/OUp to 30 × 1769 Compact I/O modules
MotionIntegrated Motion on EtherNet/IP, up to 16 axes
Tasks / programs32 tasks; 100 programs per task
Embedded communication2 × EtherNet/IP ports with embedded switch (DLR, linear or star); 1 × USB
Memory card1784-SD1 (1 GB SD, included)
Typical manufacturer-published values for this catalog number; confirm against the current manufacturer documentation before specifying.
CategoryCompactLogix
UPC / GTIN0885630424538
Part Number1769-L36ERMS
ManufacturerAllen-Bradley

1769-L36ERMS Sales History

4 sold

NJT Automation has supplied and shipped 4 1769-L36ERMS Compact GuardLogix 5370 L3 controllers since 2024; these listings are sold and the in-stock options above are ready to ship.

Sold
4 since 2024
Series
A × 2, B × 2
Allen-Bradley 1769-L36ERMS New surplus (sealed) - previously sold by NJT AutomationSold

Allen-Bradley 1769-L36ERMS Compact GaurdLogix CPU

$4,049.99 USD

New surplus (sealed)

Request Quote

Can the 1769-L36ERMS be repaired?

Yes. NJT Automation repairs the 1769-L36ERMS by mail-in: diagnostic evaluation, component-level repair and a functional test.

Option 1

NJT Managed Repair

Evaluation
Free evaluation.
Shipping
Free UPS shipping both ways, including unrepairable returns. Local drop-off and pickup available.
Pricing
$650 minimum for successful repairs.
Warranty
1-year full-function warranty included. 2- and 3-year options available.
Get a repair quoteOr text photos and symptoms to (414) 331-5954

Option 2

Independent repair bids. Compare quotes from independent repair technicians. Post your repair on RepairMode to receive competitive bids from experienced technicians. Each technician sets their own pricing and warranty.

Find a PLC repair specialiston RepairMode.com ↗

Common Failures

Failure patterns we regularly see on Compact GuardLogix 5370 L3 controller hardware like the 1769-L36ERMS:

  • Channel 0 RS-232 port damaged by a hot-plugged programming cable
  • 1769 bus faults from a worn local-bus connector or a missing end cap
  • Program lost on power cycle: battery (1769-BA) depleted, BAT LED red or flashing
  • Solid red OK LED (nonrecoverable major fault) at power-up
  • Embedded Ethernet port failure or dropped connections on -E / -ER controllers

Fault code reference

1769-L36ERMS Fault Codes

42 codes · 1756-RD001

Fault codes a Compact GuardLogix 5370 L3 controller reports on the Major Faults tab in Studio 5000 Logix Designer / RSLogix 5000 as Type:Code (T:C), as documented in Rockwell Automation publication 1756-RD001. Use them to narrow a problem down to the unit, its wiring or the application before sending it in for repair.

1769-L36ERMS fault codes
CodeFaultWhat it indicates
T01:C01Power-up faultPower was lost and restored while the controller was in RUN mode.
T01:C16Power-up faultI/O communications configuration fault detected at power-up.
T01:C40Power-up faultEnergy storage module or battery failed during the last power-down; retained data may be lost.
T01:C60Power-up faultNon-recoverable fault. The controller must be reflashed or returned for repair.
T01:C61Power-up faultNon-recoverable fault with saved diagnostic information.
T01:C62Power-up faultNon-recoverable fault with saved diagnostic information and stored user program.
T03:C16I/O faultAn I/O module connection failed on a module marked as required.
T03:C20I/O faultUnable to read ControlBus chassis information; the chassis may be bad.
T03:C21I/O faultUnable to read ControlBus chassis information; the chassis may be bad.
T03:C23I/O faultAt least one required connection was not established before going into RUN mode.
Show 32 more codes
T04:C16Program faultUnknown instruction encountered.
T04:C20Program faultArray subscript too large, or CONTROL data type POS or LEN invalid.
T04:C21Program faultCONTROL data type LEN or POS less than 0.
T04:C24Program faultUnknown data type passed to a subroutine.
T04:C31Program faultJSR or RET did not pass as many parameters as expected.
T04:C34Program faultA timer instruction had a negative value for its PRE or ACC.
T04:C42Program faultJMP to a label that did not exist or was deleted.
T04:C82Program faultCould not re-enter an executing SFC routine.
T04:C83Program faultValue out of range.
T04:C84Program faultStack overflow: stack too small to perform the operation.
T04:C85Program faultInvalid routine type.
T04:C89Program faultTarget step does not exist in the specified routine.
T04:C90Program faultA safety instruction occurs outside a safety task.
T04:C91Program faultEquipment phase instruction cannot be called from a program.
T04:C94Program faultNesting limits exceeded.
T04:C990–C999Program faultUser-defined major fault raised by the application.
T06:C01Watchdog faultTask watchdog expired: an infinite loop, an over-complex program or a higher-priority task starved the task.
T07:C40Nonvolatile faultStore to nonvolatile memory (CompactFlash / SD) failed.
T07:C41Nonvolatile faultLoad from nonvolatile memory failed: controller type mismatch.
T07:C42Nonvolatile faultLoad from nonvolatile memory failed: controller revision mismatch.
T07:C43Nonvolatile faultLoad from nonvolatile memory failed: bad checksum.
T07:C44Nonvolatile faultFailed to restore processor memory.
T07:C50Nonvolatile faultSecurity certificate invalid.
T08:C01Mode change faultMode change inhibited because a download is in progress.
T11:C01Motion faultActual position of the axis exceeded the positive overtravel limit.
T11:C02Motion faultActual position of the axis exceeded the negative overtravel limit.
T11:C03Motion faultActual position exceeded the position error tolerance.
T11:C04Motion faultEncoder channel A, B or Z connection failed.
T11:C05Motion faultEncoder noise event detected, or encoder signals not in quadrature.
T11:C06Motion faultDrive fault reported by the servo drive.
T11:C07Motion faultSynchronous connection to the servo module failed.
T11:C08Motion faultHardware failure in the servo module.

Where the manual's only remedy for a code is to replace the unit or module, the code is pointing at a hardware fault inside that part. Those are the faults NJT Automation repairs at component level, so a repair quote is usually the first thing to check before buying a replacement.

Source: Rockwell Automation publication 1756-RD001, Logix 5000 Controller and I/O Fault Codes. Codes are listed as documented; fault behaviour can vary by firmware revision, so confirm against the manual for your unit's series.

Photos by NJT Automation; test videos from NJT or network repair technicians.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The Allen-Bradley 1769-L36ERMS is a Compact GuardLogix 5370 L3 controller, 3 MB user memory + 1.5 MB safety, dual EtherNet/IP ports, 48 nodes, 30 Compact I/O (1769) modules in 3 banks, 16-axis integrated motion.
NJT Automation currently has 1 unit of the 1769-L36ERMS in stock in refurbished condition (Series B). Each listing states its own condition and series. Refurbished means a previously used unit that has been restored to working order before sale. The inspection, repairs and testing performed on a given unit, and its warranty term, are stated on that unit’s own listing. From the listing: This component has been professionally cleaned, inspected, and repaired as needed to restore full functionality.
The 1769-L36ERMS starts at $1,999.99 (Refurbished, Series B) at NJT Automation. One unit is in stock. 4 1769-L36ERMS Compact GuardLogix 5370 L3 controllers have sold since 2024.
1 unit of the 1769-L36ERMS Compact GuardLogix 5370 L3 controller are on the shelf in Milwaukee, WI. Orders before 5:00 PM Central on a business day ship the same day; next-day air is available at checkout.
Dual EtherNet/IP ports (linear / device-level-ring topologies), USB programming port, SD card slot.
3 MB of standard user memory plus 1.5 MB of safety memory.
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.