Allen-Bradley 2094-BM02-S Kinetix 6000 – Ready to Ship / Pick Up

In stock: 2094-BM02-S Kinetix 6000 400V-class axis module (AM): 6.6 kW / 14.6 A (0-pk) inverter axis on the shared DC bus. NJT Automation has 3 units available in Milwaukee, WI, ready to ship or available for local pickup. Includes a one-year full-function warranty.

Allen-Bradley 2094-BM02-S Kinetix 6000 axis module (AM), 6.6 kW, 400V-class – front view

Allen-Bradley 2094-BM02-S Kinetix 6000 axis module (AM), 6.6 kW, 400V-class – front view

$549.99 – $599.99USD

Request Repair QuoteEstimated $1,655.00

Part Number	2094-BM02-S
Description	Kinetix 6000 axis module (AM), 6.6 kW, 400V-class. In stock in used condition, Series B and C.
Shipping	Ships today UPS Ground included \| Next-Day Air and Worldwide Shipping available at checkout
Pickup	Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty	1-year full-function warranty provided by NJT Automation. Warranty details Included 1 year, full-function 2 years +15% of product price (from $82.50) 3 years +25% of product price (from $137.50) View full warranty policy
Returns	90-day free returns. View return policy
Exchange	Send us your defective 2094-BM02-S after your purchase for a 10% core credit ($55 – $60). We also purchase old or damaged parts outright.

Replacement Options for 2094-BM02-S

In stock and ready to ship today

Allen-Bradley 2094-BM02-S Used - Buy 2094-BM02-S replacement | NJT Automation

Allen-Bradley 2094-BM02-S Used - alternate view

Allen Bradley 2094-BM02-S /B Kinetix 6000 Bulletin 2094 Axis Module 15A

$549.99 USDIn-stock match

Condition: Used

Series B

1 in stock

Allen-Bradley 2094-BM02-S Used - Buy 2094-BM02-S replacement | NJT Automation

Allen-Bradley 2094-BM02-S Used - alternate view

Allen Bradley 2094-BM02-S /C Kinetix 6000 Axis Module 3-Phase 2094BM02S

$599.99 USDIn-stock match

Condition: Used

Series C

2 in stock

Availability

Multiple Options Available

Variants

Part NumberConditionSeriesQtyPrice

2094-BM02-S /B$549.99

Used · Series B · 1 in stock

2094-BM02-S /BUsedSeries B1$549.99 USD

2094-BM02-S /C$599.99

Used · Series C · 2 in stock

2094-BM02-S /CUsedSeries C2$599.99 USD

2094-BM02-S

Refurbished — pick series, then request a quote

Series neededRequest Quote

2094-BM02-SRefurbishedSeries needed—Request Quote

Repairs

2094-BM02-S Mail-In Repair Service

Estimated: $1,655.00

Part Number Decoder

Kinetix 6000 axis module (AM)

2094BM02-S

Kinetix 6000 400V-class axis module (AM): 6.6 kW / 14.6 A (0-pk) inverter axis on the shared DC bus; sercos interface, safe-off.

2094: BulletinKinetix 6000-class multi-axis servo drive system: an integrated axis module (converter + first inverter) feeds axis modules over a shared DC bus on a Bulletin 2094 power rail. Bulletin 2094 also covers the Kinetix 6200 / 6500 modular drives and the system's power rails, line interface, shunt and slot-filler modules.
B: Voltage class400V-class: 360…480V AC, three-phase input system (the AM itself runs from the power rail's DC bus).
M02: Inverter ratingAxis module (AM): inverter only, fed from the IAM over the power rail. 6.6 kW continuous output, 14.6 A (0-pk) continuous current.
-S: Safe-off-S: Kinetix 6000 drive with safe-off (Safe Torque-Off) functionality; sercos interface fiber-optic ring to the Logix motion controller.

Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Physical Data

Weight and DimensionsWeight5.60 lb (2.54 kg)

Weight	2.54 kg (5.60 lb) Typical unit weight, Kinetix 6000 drive module
Shipping Weight	3.26 kg (7.19 lb) Estimated: unit weight plus box and packing material; bills as 8 lb
Shipping Box (L × W × H)	14 × 12 × 10 in. (356 × 305 × 254 mm) Most common box recorded for this catalog number

Product weight are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Datasheet

Datasheet available for download

Generated from product specifications; not an official Allen-Bradley datasheet. For an official datasheet, contact Allen-Bradley or an authorized distributor.

Similar Part Numbers

2094-BM02 Safe-off: original Kinetix 6000 drive without the safe-off option
2094-BMP5 Inverter rating: Axis module (AM); Safe-off: original Kinetix 6000 drive without the

Allen Bradley Information

Lifecycle: Active. Verify current status with the manufacturer.

Alternate Part Numbers

2094BM02S, 2O94-BMO2 S

Category

UPC / GTIN

0820919595714

Part Number

2094-BM02-S

Manufacturer

Allen-Bradley

Can the 2094-BM02-S be repaired?

Yes. NJT Automation offers mail-in repair for the 2094-BM02-S, including diagnostic evaluation, component-level repair, and functional testing.

NJT Managed Repair

One vendor. One warranty. NJT manages the entire process.

1-year full-function NJT warranty, with 2- and 3-year options available
Rush service available for production-critical repairs
No evaluation or diagnostic charges
No repair, no charge
"Unrepairable" is not an option
Pre-paid UPS shipping label provided for sending your unit in
$650 minimum repair charge, shipping included both ways

Get an NJT Repair Quote

Looking for another option? For lower-cost repairs or if you prefer to work directly with an independent repair specialist, compare bids through RepairMode. RepairMode providers operate independently and set their own pricing and warranty terms.

Find a servo drive repair specialiston RepairMode.com ↗

Common 2094-BM02-S failures

Failure patterns we regularly see on Kinetix 6000 axis module (AM) hardware like the 2094-BM02-S:

Motor feedback lost / illegal Hall state (E07 / E11) from a failed feedback board or connector
Encoder communication / data faults (E30 / E31) with intelligent feedback
Ground fault (E34) that follows the module, not the motor
SERCOS ring fault (E50) from a failed fiber transceiver on SERCOS modules
Motor brake output failure

Repair or replace?

ReplaceReplacement Kinetix 6000 axis module (AM) units are usually surplus or refurbished. Replace the 2094-BM02-S when the axis is down and a unit is available. Match the catalog suffix so the feedback and safety options line up with the rest of the system. Stick with the exact 2094-BM02-S. The suffix sets the 6.6 kW rating and 400V-class, so a near match is a different unit. The 2094-BM02-S is on our shelf now and ships the same day for orders placed before 5:00 PM Central.

RepairRepair is usually the better economics on the 2094-BM02-S (6.6 kW): power modules, bus capacitors, control power supplies and fans are replaced, the drive is run under load, and a matched multi-axis system stays intact. Most 2094-BM02-S units reach our bench with one of two symptoms: “IPM fault (E05)” or “Motor feedback lost / illegal Hall state (E07 / E11)”. Already swapped it out? Repairing the failed 2094-BM02-S turns it into a tested spare, and on an older platform that spare can be hard to buy later. The 2094-BM02-S repair is estimated $1,655.00, function-tested before return and covered by a 1-year warranty.

Functional test video

Bench test from a completed 2094-BM02-S repair.

RepairMode test video for 2094-BM02-S

Request a Repair Quote

Text photos of the faulty unit and the symptoms to (414) 331-5954.

Start Your Repair Today

Related services:Kinetix Servo Repair All Repair Services

All product photos were taken by NJT Automation. Test videos originated from either NJT Automation internally or from repair technicians within our network.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

Frequently Asked Questions

What is the 2094-BM02-S?

The Allen-Bradley 2094-BM02-S is a Kinetix 6000 400V-class axis module (AM): 6.6 kW / 14.6 A (0-pk) inverter axis on the shared DC bus; sercos interface, safe-off.

What condition is the 2094-BM02-S in?

NJT Automation currently has 3 units of the 2094-BM02-S in stock in used condition (Series B and C). Each listing states its own condition and series. Clean used pull with full functionality. Minimal cosmetic wear and backed by our 1-year warranty.

When does this part ship?

NJT Automation has 3 units of the 2094-BM02-S Kinetix 6000 axis module (AM) on the shelf in Milwaukee, WI, priced from $549.99 to $599.99. Orders placed before 5:00 PM Central on business days ship the same day; orders placed after the cutoff ship the next business day.

Can you ship this next-day air?

Yes. UPS Next Day Air is available at checkout for the 2094-BM02-S Kinetix 6000 axis module (AM). Place your order before 5:00 PM Central on a business day and your in-stock item ships the same day for next-business-day delivery.

Can I pick this item up locally?

Yes. Free local pickup is available for the 3 in-stock 2094-BM02-S units at NJT Automation, 2122 N Prospect Ave, Milwaukee, WI, during business hours. Contact us to arrange a pickup time.

What is the power rating of the 2094-BM02-S?

Axis module (AM): inverter only, fed from the IAM over the power rail.

Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.