Allen-Bradley 2097-V34PR5-LM Kinetix 350 – Ready to Ship / Pick Up

In stock: 2097-V34PR5-LM Kinetix 350 2.0 kW servo drive, 480V AC three-phase input. NJT Automation has 3 units available in Milwaukee, WI, ready to ship or available for local pickup. Includes a one-year full-function warranty.

Allen-Bradley 2097-V34PR5-LM Kinetix 350 servo drive, 2.0 kW, 480V AC – front view

Allen-Bradley 2097-V34PR5-LM Kinetix 350 servo drive, 2.0 kW, 480V AC – front view

$3,149.99 – $3,749.99USD

Request Repair QuoteFlat rate $1,999.99

Part Number	2097-V34PR5-LM
Description	Kinetix 350 servo drive, 2.0 kW, 480V AC. In stock in used and refurbished condition, Series A.
Shipping	Ships today UPS Ground included \| Next-Day Air and Worldwide Shipping available at checkout
Pickup	Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty	1-year full-function warranty provided by NJT Automation. Warranty details Included 1 year, full-function 2 years +15% of product price (from $472.50) 3 years +25% of product price (from $787.50) View full warranty policy
Returns	90-day free returns. View return policy
Exchange	Send us your defective 2097-V34PR5-LM after your purchase for a 10% core credit ($315 – $375). We also purchase old or damaged parts outright.

Replacement Options for 2097-V34PR5-LM

In stock and ready to ship today

Allen-Bradley 2097-V34PR5-LM Used - Buy 2097-V34PR5-LM replacement | NJT Automation

Allen-Bradley 2097-V34PR5-LM Used - alternate view

Allen Bradley 2097-V34PR5-LM /A Kinetix 350 3-Ph AC Servo Drive + 1 yr Warranty

$3,149.99 USDIn-stock match

Condition: Used

Series A

1 in stock

Allen-Bradley 2097-V34PR5-LM Refurbished - Buy 2097-V34PR5-LM replacement | NJT Automation

Allen-Bradley 2097-V34PR5-LM Refurbished - alternate view

Allen Bradley 2097-V34PR5-LM /A 400/480VAC Kinetix 350 Servo Drive - Refurbished

$3,749.99 USDIn-stock match

Condition: Refurbished

Series A

2 in stock

Availability

Multiple Options Available

Variants

Part NumberConditionSeriesQtyPrice

2097-V34PR5-LM /AUsedSeries A1$3,149.99 USD 2097-V34PR5-LM /ARefurbishedSeries A2$3,749.99 USD

2097-V34PR5-LMRefurbishedSeries needed—Request Quote

Looking for the Kinetix 300 (without -LM)? 2097-V34PR5 has 10 in stock.

Repairs

2097-V34PR5-LM Mail-In Repair Service | Flat Rate

Flat rate: $1,999.99

Part Number Decoder

Kinetix 350 servo drive

2097V34PR5-LM

Kinetix 350 2.0 kW servo drive, 480V AC three-phase input, 5.7 A continuous output (0-pk). Integrated Motion on EtherNet/IP (CIP Motion) for Logix controllers; Safe Torque-Off.

2097: BulletinKinetix 300 / Kinetix 350: compact single-axis EtherNet/IP servo drives (0.4…3.0 kW) for Allen-Bradley MP-Series, TL-Series and similar motors.
V3: Drive familyKinetix 300-class compact servo drive (the digit that follows sets the input voltage).
4: Input voltage480V AC three-phase. Features: Safe Torque-Off.
PR5: Power rating2.0 kW continuous output power: 5.7 A continuous output current (0-pk).
-LM: Motion controlKinetix 350: Integrated Motion on EtherNet/IP (CIP Motion). Axis is configured and commanded from a ControlLogix / CompactLogix controller in Studio 5000.

Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Physical Data

Weight and DimensionsWeight4.41 lb (2.00 kg)H × W × D7.3 × 3.7 × 7.2 in. (185 × 94 × 182 mm)

Weight	2.00 kg (4.41 lb) Typical unit weight
Dimensions (H × W × D)	185 × 94 × 182 mm (7.3 × 3.7 × 7.2 in.) Kinetix 300 / 350 drive
Shipping Weight	3.09 kg (6.82 lb) Estimated: unit weight plus box and packing material; bills as 7 lb
Shipping Box (L × W × H)	14 × 14 × 14 in. (356 × 356 × 356 mm) Smallest standard box fitting the product with 3 in. cushioning per side

Product weight and dimensions are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Datasheet

Datasheet available for download

Generated from product specifications; not an official Allen-Bradley datasheet. For an official datasheet, contact Allen-Bradley or an authorized distributor.

Similar Part Numbers

2097-V33PR5-LM Input voltage: 120/240V AC single-phase or 240V AC three-phase
2097-V34PR3-LM Power rating: 1.0 kW continuous output power
2097-V34PR6-LM Power rating: 3.0 kW continuous output power
2097-V34PR5 Motion control: Kinetix 300, EtherNet/IP indexing servo drive with built-in
2097-V32PR2-LM Input voltage: 240V AC single-phase with integrated AC; Power rating: 0.8 kW continuous output power

Allen Bradley Information

Technical Description

Kinetix 350 2.0 kW servo drive, 480V AC three-phase input, 5.7 A continuous output (0-pk). Integrated Motion on EtherNet/IP (CIP Motion) for Logix controllers; Safe Torque-Off.

Lifecycle: Discontinued. Verify current status with the manufacturer.

Technical Specifications12 parameters from manufacturer-published specifications

Drive family	Kinetix 350 single-axis EtherNet/IP servo drive
AC input voltage	320…528V AC three-phase (480V nominal)
AC input frequency	48…62 Hz
Continuous output current	4.0 A rms (5.7 A 0-pk)
Peak output current	12.0 A rms (17.0 A 0-pk), 2 s at 50% duty
Continuous output power	2.00 kW
Control power back-up	20…26V DC
Safety	Safe Torque-Off
AC line filter	External 2097-Fx or Bulletin 2090 (optional)
Control	Integrated Motion on EtherNet/IP (CIP Motion) with ControlLogix 5570/5580 and CompactLogix 5370/5380; RSLogix 5000 v20 or later
Motor feedback	Hiperface, TTL incremental, Tamagawa 17-bit serial
Power dissipation	58 W

Typical manufacturer-published values for this catalog number; confirm against the current manufacturer documentation before specifying.

Alternate Part Numbers

2097V34PR5LM, 2O97-V34PR5-LM

Category

UPC / GTIN

884951256033

Part Number

2097-V34PR5-LM

Manufacturer

Allen-Bradley

Can the 2097-V34PR5-LM be repaired?

Yes. NJT Automation offers mail-in repair for the 2097-V34PR5-LM, including diagnostic evaluation, component-level repair, and functional testing.

NJT Managed Repair

One vendor. One warranty. NJT manages the entire process.

1-year full-function NJT warranty, with 2- and 3-year options available
Rush service available for production-critical repairs
No evaluation or diagnostic charges
No repair, no charge
"Unrepairable" is not an option
Pre-paid UPS shipping label provided for sending your unit in
$650 minimum repair charge, shipping included both ways

Get an NJT Repair Quote

Looking for another option? For lower-cost repairs or if you prefer to work directly with an independent repair specialist, compare bids through RepairMode. RepairMode providers operate independently and set their own pricing and warranty terms.

See completed 2097-V34PR5-LM repairson RepairMode.com ↗

Common Kinetix 350 problems

Failure patterns we regularly see on Kinetix 350 hardware like the 2097-V34PR5-LM:

Drive will not power up or drops out after a power event
CIP Motion axis faults, including module connection and synchronization loss
Safe Torque Off (STO) faults
Motor or encoder feedback faults
Overcurrent trips or power-stage failures

Repair or replace?

ReplaceReplacement Kinetix 350 servo drive units are usually surplus or refurbished. Replace the 2097-V34PR5-LM when the axis is down and a unit is available. Match the catalog suffix so the feedback and safety options line up with the rest of the system. Stick with the exact 2097-V34PR5-LM. The suffix sets the 2.0 kW, 480V AC rating, so a near match is a different unit. We stock the 2097-V34PR5-LM. Order by 5:00 PM Central for same-day shipping.

RepairRepair is usually the better economics on the 2097-V34PR5-LM (2 kW): power modules, bus capacitors, control power supplies and fans are replaced, the drive is run under load, and a matched multi-axis system stays intact. Already swapped it out? Repairing the failed 2097-V34PR5-LM turns it into a tested spare, and on an older platform that spare can be hard to buy later. Expect flat rate $1,999.99 for the 2097-V34PR5-LM repair, with full-function testing and a 1-year warranty included.

Functional test video

Bench test from a completed 2097-V34PR5-LM repair.

RepairMode test video for 2097-V34PR5-LM

Documented failure modes

Commonly reported issues for the Allen-Bradley 2097-V34PR5-LM include Blown block and gating and Power supply, based on recent completed repairs. These are compiled from customer issue descriptions and technician repair notes. A technician confirms the actual root cause of each unit during evaluation.

Request a Repair Quote

Text photos of the faulty unit and the symptoms to (414) 331-5954.

Start Your Repair Today

Related services:Kinetix Servo Repair All Repair Services

All product photos were taken by NJT Automation. Test videos originated from either NJT Automation internally or from repair technicians within our network.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

Frequently Asked Questions

What is the 2097-V34PR5-LM?

The Allen-Bradley 2097-V34PR5-LM is a Kinetix 350 2.0 kW servo drive, 480V AC three-phase input, 5.7 A continuous output (0-pk). Integrated Motion on EtherNet/IP (CIP Motion) for Logix controllers; Safe Torque-Off.

What condition is the 2097-V34PR5-LM in?

NJT Automation currently has 3 units of the 2097-V34PR5-LM in stock in used and refurbished condition (Series A). Each listing states its own condition and series. Clean used pull with full functionality. Minimal cosmetic wear and backed by our 1-year warranty.

How much does the 2097-V34PR5-LM cost?

At NJT Automation, 3 2097-V34PR5-LM Kinetix 350 servo drives have sold since 2025 for $2,500 – $2,800. Right now 3 units are in stock at $3,150 to $3,750, depending on condition and series.

When does this part ship?

NJT Automation has 3 units of the 2097-V34PR5-LM Kinetix 350 servo drive on the shelf in Milwaukee, WI, priced from $3,149.99 to $3,749.99. Orders placed before 5:00 PM Central on business days ship the same day; orders placed after the cutoff ship the next business day.

Can you ship this next-day air?

Yes. UPS Next Day Air is available at checkout for the 2097-V34PR5-LM Kinetix 350 servo drive. Place your order before 5:00 PM Central on a business day and your in-stock item ships the same day for next-business-day delivery.

Can I pick this item up locally?

Yes. Free local pickup is available for the 3 in-stock 2097-V34PR5-LM units at NJT Automation, 2122 N Prospect Ave, Milwaukee, WI, during business hours. Contact us to arrange a pickup time.

What power input does the 2097-V34PR5-LM require?

480V AC three-phase.

What is the power rating of the 2097-V34PR5-LM?

2.0 kW continuous output power: 5.7 A continuous output current (0-pk).

Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.