View Cart

Allen-Bradley 1756-L71 ControlLogix 5570 Processor 2 MB

In stock: 2 units in Milwaukee, WI.

2 MB ControlLogix 5570 controller

Price

$1,199.99USDUsed, Series BView listing

Request Repair QuoteEstimated $1,440.00
Part Number1756-L71
DescriptionControlLogix 5570 controller, 2 MB. In stock in used and refurbished condition, Series B.
Shipping
Ships same or next business day
UPS Ground
Included. Next-Day Air and worldwide shipping available.
Courier
Within 350 miles, est. $3.50/mile, subject to availability.
Pickup
Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954.
Warranty
1-year full-function warranty provided by NJT Automation.
Warranty details
Included
1 year, full-function
2 years
+15% of product price ($180.00)
3 years
+25% of product price ($300.00)
View full warranty policy
Returns
90-day free returns. View return policy
Exchange

Send in your defective 1756-L71 for a 10% core credit.

Replacement 1756-L71 Options

Allen-Bradley 1756-L71 ControlLogix 5571 Logix5571 CPU 2MB B

$1,199.99 USDIn-stock match

Condition: Used

Series B

1 in stockView details

Allen-Bradley 1756-L71 ControlLogix 5571 Logix5571 Processor 2MB

$1,199.99 USDIn-stock match

Condition: Refurbished

Series B

1 in stockView details
Variants
Part NumberConditionSeriesQtyPrice
1756-L71 /B$1,199.99
Used · Series B · 1 in stock
1756-L71 /BUsedSeries B1$1,199.99 USD
1756-L71 /B$1,199.99
Refurbished · Series B · 1 in stock
1756-L71 /BRefurbishedSeries B1$1,199.99 USD

1756-L71

Refurbished — pick series, then request a quote

Request Quote
1756-L71Refurbished—Request Quote
Availability
2 Units in StockIndependently SourcedNot an OEM-Authorized Distributor
Repairs

1756-L71 Mail-In Repair Service

Estimated: $1,440.00

Part Number Decoder

ControlLogix 5570 controller
1756L71
1756
BulletinControlLogix: Rockwell Automation's chassis-based control platform (controllers, I/O, communication modules, power supplies and chassis).
L
Module typeLogix controller (CPU module).
7
GenerationControlLogix 5570: Logix5570 series (USB programming port, SD card, energy storage module).
1
Memory size2 MB of standard user memory.
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here.

Series & Revisions

Series B in stock; other series on request.

All series use the 1756-ESMCAP energy-storage module and a 1784-SD1 / SD2 card; no battery.

Series notes: Studio 5000 keys on catalog number and firmware revision, not series.

Intended Use

Designed for plant-wide discrete, process, and motion control applications. ControlLogix controllers run high I/O-count machines, batch and continuous process lines, and coordinated multi-axis motion from a single chassis, with redundancy and plant-network connectivity when the application calls for it. Typical homes are automotive and tire plants, food and beverage lines, water and wastewater, oil and gas skids, and large packaging systems.

Physical Data

Weight and DimensionsWeight0.87 lb (0.39 kg)H × W × D5.7 × 1.4 × 5.7 in. (145 × 35 × 145 mm)
Weight0.39 kg (0.87 lb)
Typical unit weight
Dimensions (H × W × D)145 × 35 × 145 mm (5.7 × 1.4 × 5.7 in.)
Single-slot controller module
Shipping Weight0.92 kg (2.03 lb)
Estimated: unit weight plus box and packing material; bills as 3 lb
Shipping Box (L × W × H)12 × 12 × 8 in. (305 × 305 × 203 mm)
Smallest standard box fitting the product with 3 in. cushioning per side
Product weight and dimensions are typical manufacturer-published values and may differ by series or option. Shipping box and weight are estimates for freight planning; the packed unit may ship in a different box.

Similar Part Numbers

  • 1756-L75 Memory size: 32 MB of standard user memory

Allen-Bradley Information

Technical Specifications14 parameters from manufacturer-published specifications
Controller familyControlLogix 5570
User memory2 MB
I/O memory0.98 MB
Tasks32
Controller connections500
Embedded communication1 × USB (network access via 1756 communication modules)
Digital I/O, max128,000
Analog I/O, max4,000
Memory card1784-SD1 (1 GB SD, included)
Energy storage1756-ESMCAP energy storage module (no battery)
Backplane current800 mA @ 5.1V DC
Power dissipation2.5 W
Chassis slots1
Weight, approx.0.25 kg
Typical manufacturer-published values for this catalog number; confirm against the current manufacturer documentation before specifying.
CategoryControlLogix
UPC / GTIN612598876013
Part Number1756-L71
ManufacturerAllen-Bradley

1756-L71 Sales History

1 sold · +5 on eBay

NJT Automation has supplied and shipped one 1756-L71 ControlLogix 5570 controller in 2024; these listings are sold and the in-stock options above are ready to ship.

Sold
1 in 2024
Series
B × 1
Allen-Bradley 1756-L71 New surplus (sealed) - previously sold by NJT AutomationSold

Allen-Bradley 1756-L71 GuardLogix Processor Module

$1,419.99 USD

New surplus (sealed)

Request Quote

Can the 1756-L71 be repaired?

Yes. NJT Automation repairs the 1756-L71 by mail-in: diagnostic evaluation, component-level repair and a functional test.

Option 1

NJT Managed Repair

Evaluation
Free evaluation.
Shipping
Free UPS shipping both ways, including unrepairable returns. Local drop-off and pickup available.
Pricing
$650 minimum for successful repairs.
Warranty
1-year full-function warranty included. 2- and 3-year options available.
Get a repair quoteOr text photos and symptoms to (414) 331-5954

Option 2

Independent repair bids. Compare quotes from independent repair technicians. Post your repair on RepairMode to receive competitive bids from experienced technicians. Each technician sets their own pricing and warranty.

View completed 1756-L71 repairson RepairMode.com ↗

Common Failures

Failure patterns we regularly see on ControlLogix 5570 controller hardware like the 1756-L71:

  • SD card corruption preventing the stored project from loading at power-up
  • Solid red OK LED (nonrecoverable major fault) that returns after clearing
  • Program lost on power cycle: energy storage module (1756-ESMCAP / ESMNSE) failing to hold the controller through a save
  • Backplane communication faults from bent chassis pins after repeated module swaps
  • Scrolling status display blank or unreadable

Fault code reference

1756-L71 Fault Codes

42 codes · 1756-RD001

Fault codes a ControlLogix 5570 controller reports on the Major Faults tab in Studio 5000 Logix Designer / RSLogix 5000 as Type:Code (T:C), as documented in Rockwell Automation publication 1756-RD001. Use them to narrow a problem down to the unit, its wiring or the application before sending it in for repair.

1756-L71 fault codes
CodeFaultWhat it indicates
T01:C01Power-up faultPower was lost and restored while the controller was in RUN mode.
T01:C16Power-up faultI/O communications configuration fault detected at power-up.
T01:C40Power-up faultEnergy storage module or battery failed during the last power-down; retained data may be lost.
T01:C60Power-up faultNon-recoverable fault. The controller must be reflashed or returned for repair.
T01:C61Power-up faultNon-recoverable fault with saved diagnostic information.
T01:C62Power-up faultNon-recoverable fault with saved diagnostic information and stored user program.
T03:C16I/O faultAn I/O module connection failed on a module marked as required.
T03:C20I/O faultUnable to read ControlBus chassis information; the chassis may be bad.
T03:C21I/O faultUnable to read ControlBus chassis information; the chassis may be bad.
T03:C23I/O faultAt least one required connection was not established before going into RUN mode.
Show 32 more codes
T04:C16Program faultUnknown instruction encountered.
T04:C20Program faultArray subscript too large, or CONTROL data type POS or LEN invalid.
T04:C21Program faultCONTROL data type LEN or POS less than 0.
T04:C24Program faultUnknown data type passed to a subroutine.
T04:C31Program faultJSR or RET did not pass as many parameters as expected.
T04:C34Program faultA timer instruction had a negative value for its PRE or ACC.
T04:C42Program faultJMP to a label that did not exist or was deleted.
T04:C82Program faultCould not re-enter an executing SFC routine.
T04:C83Program faultValue out of range.
T04:C84Program faultStack overflow: stack too small to perform the operation.
T04:C85Program faultInvalid routine type.
T04:C89Program faultTarget step does not exist in the specified routine.
T04:C90Program faultA safety instruction occurs outside a safety task.
T04:C91Program faultEquipment phase instruction cannot be called from a program.
T04:C94Program faultNesting limits exceeded.
T04:C990–C999Program faultUser-defined major fault raised by the application.
T06:C01Watchdog faultTask watchdog expired: an infinite loop, an over-complex program or a higher-priority task starved the task.
T07:C40Nonvolatile faultStore to nonvolatile memory (CompactFlash / SD) failed.
T07:C41Nonvolatile faultLoad from nonvolatile memory failed: controller type mismatch.
T07:C42Nonvolatile faultLoad from nonvolatile memory failed: controller revision mismatch.
T07:C43Nonvolatile faultLoad from nonvolatile memory failed: bad checksum.
T07:C44Nonvolatile faultFailed to restore processor memory.
T07:C50Nonvolatile faultSecurity certificate invalid.
T08:C01Mode change faultMode change inhibited because a download is in progress.
T11:C01Motion faultActual position of the axis exceeded the positive overtravel limit.
T11:C02Motion faultActual position of the axis exceeded the negative overtravel limit.
T11:C03Motion faultActual position exceeded the position error tolerance.
T11:C04Motion faultEncoder channel A, B or Z connection failed.
T11:C05Motion faultEncoder noise event detected, or encoder signals not in quadrature.
T11:C06Motion faultDrive fault reported by the servo drive.
T11:C07Motion faultSynchronous connection to the servo module failed.
T11:C08Motion faultHardware failure in the servo module.

Where the manual's only remedy for a code is to replace the unit or module, the code is pointing at a hardware fault inside that part. Those are the faults NJT Automation repairs at component level, so a repair quote is usually the first thing to check before buying a replacement.

Source: Rockwell Automation publication 1756-RD001, Logix 5000 Controller and I/O Fault Codes. Codes are listed as documented; fault behaviour can vary by firmware revision, so confirm against the manual for your unit's series.

Photos by NJT Automation; test videos from NJT or network repair technicians.

Still have questions?

Find answers to shipping, warranties, repairs, and more.

The Allen-Bradley 1756-L71 is a 2 MB ControlLogix 5570 controller.
NJT Automation currently has 2 units of the 1756-L71 in stock in used and refurbished condition (Series B). Each listing states its own condition and series. Refurbished means a previously used unit that has been restored to working order before sale. The inspection, repairs and testing performed on a given unit, and its warranty term, are stated on that unit’s own listing. Used means a unit removed from service and sold without refurbishment. Cosmetic condition, any functional testing performed, and the warranty term are stated on each unit’s own listing.
2 units of the 1756-L71 ControlLogix 5570 controller are on the shelf in Milwaukee, WI, priced from $1,199.99. Orders before 5:00 PM Central on a business day ship the same day; next-day air is available at checkout.
2 MB of standard user memory.
Disclaimer

Trademarks & Compatibility

All trademarks, service marks, trade names, brand names, and logos displayed on this website are the property of their respective owners. Any references to manufacturers, products, or brands are for identification and compatibility purposes only and do not imply any affiliation with, endorsement by, sponsorship from, or authorization by the respective trademark owners.

Independent Supplier

NJT Automation is an independent supplier of surplus, refurbished, and pre-owned industrial automation equipment. Unless expressly stated otherwise, NJT Automation is not an authorized distributor, dealer, representative, or affiliate of the original equipment manufacturer (OEM) for any products offered on this website.

Product Condition & Warranty

Products sold by NJT Automation may be surplus inventory, discontinued models, older series, or units with earlier manufacturing date codes than those currently available from the OEM or its authorized distribution network. As NJT Automation is not an authorized distributor, manufacturer warranties, support programs, and other OEM services may not apply. Any warranty provided is solely that of NJT Automation, where applicable.

Firmware & Software Licensing

Certain programmable logic controllers (PLCs), drives, HMIs, and other electronic products may require firmware to operate. While some products may include firmware, NJT Automation makes no representations or warranties regarding whether firmware is installed, the firmware version or revision level, its compatibility with your application, or its licensing status.

NJT Automation does not provide, obtain, transfer, or license firmware on behalf of customers. We make no representation regarding your ability or legal right to obtain, download, install, or use firmware from the OEM, its authorized distributors, or any other source. It is the customer's sole responsibility to ensure compliance with all applicable End User License Agreements (EULAs), software licenses, intellectual property rights, and other terms governing the acquisition, installation, and use of firmware.