Allen-Bradley 2711P-RP1A PanelView Plus 64 MB – Pickup in Store
In stock: 1 unit in Milwaukee, WI. Physically stocked and ready to ship or available for local pickup. Includes a 1-year full-function warranty.
PanelView Plus logic module for 700…1500 terminals · 64 MB flash / 64 MB RAM · AC powered
Actual NJT inventory photos
Price
$439.99USDUsedView listing
| Part Number | 2711P-RP1A |
| Description | PanelView Plus logic module, 64 MB. In stock in used condition. |
| Shipping | Ships same or next business day
|
| Pickup | Free local pickup at 2122 N Prospect Ave. Call ahead at (414) 331-5954. |
| Warranty | 1-year full-function warranty provided by NJT Automation. Warranty details
|
| Returns | 90-day free returns. View return policy |
| Exchange | Send us your defective 2711P-RP1A after your purchase for a 10% core credit. We also purchase old or damaged parts outright. |
Replacement Options for 2711P-RP1A
| Variants | Part NumberConditionSeriesQtyPrice 2711P-RP1A$439.99 Used · 1 in stock2711P-RP1AUsed—1$439.99 USD | ||
| Availability | 1 unit in stock | ||
| Repairs | 2711P-RP1A Mail-In Repair Service | ||
Part Number Decoder | PanelView Plus logic module 2711PRP1A
Decoded from the Rockwell Automation catalog-number structure. Series and firmware revision are printed on the product label, not encoded here. | ||
Intended Use | Built for machine operator interface (HMI) applications. The logic module is the computer behind a PanelView Plus terminal, running the FactoryTalk View ME application that operators use to monitor and run packaging, process and assembly equipment. | ||
Physical Data | Weight and DimensionsBox12 × 10 × 8 in.
Shipping box and weight are recorded from previous shipments of this catalog number and are provided for freight planning. | ||
Similar Part Numbers |
| ||
Allen Bradley Information | Technical SpecificationsLifecycle status
| ||
| Category | PanelView Plus | ||
| UPC / GTIN | 612598338238 | ||
| Part Number | 2711P-RP1A | ||
| Manufacturer | Allen-Bradley | ||
Previously sold 2711P-RP1A2 sold
NJT Automation has supplied and shipped 2 2711P-RP1A PanelView Plus logic modules in 2024; these listings are sold and the in-stock options above are ready to ship.
- Sold
- 2 in 2024
Image gallery31 PHOTOSActual units photographed by NJT
Can the 2711P-RP1A be repaired?
Yes. NJT Automation repairs the 2711P-RP1A by mail-in: diagnostic evaluation, component-level repair and a functional test, backed by a 1-year full-function warranty.
Option 1
NJT managed repair
- Evaluation
- Free. No repair, no charge.
- Shipping
- Prepaid UPS label both ways.
- Pricing
- $650 minimum. Rush service available.
- Warranty
- 1-year full-function warranty included; 2- and 3-year options.
Option 2
Independent repair bids. Compare quotes from independent repair technicians. Post your repair on RepairMode to receive competitive bids from experienced technicians. Each technician sets their own pricing and warranty.
Common Failures
Failure patterns we regularly see on PanelView Plus logic module hardware like the 2711P-RP1A:
- Real-time clock resetting at each power cycle: depleted 2711P-RY2032 coin cell
- Communication module slot not recognizing a 2711P-RN card
- Random resets or lockups under load: failed electrolytic capacitors on the power supply section of the logic board
- Ethernet port dead or dropping the PLC connection: damaged magnetics or PHY after a ground-loop or surge
- Display module connector pins bent or worn from repeated separation
Fault code reference
2711P-RP1A Fault Codes
20 codes · 2711P-UM001
Fault codes a PanelView Plus logic module reports on the screen at start-up (error number with an ERROR! message) and the Fault (red) and Comm (green) indicators, as documented in Rockwell Automation publication 2711P-UM001. Use them to narrow a problem down to the unit, its wiring or the application before sending it in for repair.
Start-up error messages
| Error # | Displayed message | What it indicates |
|---|---|---|
| 1 | RAM Test | RAM test failure. Reset the terminal; if it persists, reseat the SO-DIMM (700…1500). A persistent failure is a logic board fault. |
| 14 | RAM Header Check | The OS firmware being downloaded is not compatible with the hardware (400/600 terminals). |
| 20 | Transfer Image | Programming the downloaded OS firmware into flash failed (400/600 terminals). |
| 23 | Download Task / Internal CF | Firmware image too large (400/600), or an error programming firmware to the internal CompactFlash (700…1500). |
| 24 | CRC Check | Checksum of the OS firmware failed; reload firmware. Persistent failures point to the internal CompactFlash or logic module. |
| 25 | Invalid Prod Family | The OS firmware being downloaded is not for this terminal family (400/600 terminals). |
| 27 | Decompress System | Error decompressing the OS firmware from flash to RAM (400/600 terminals). |
| 30 | Watchdog Test | Watchdog test failure; reload firmware, then suspect the logic module. |
| 31 | Stuck Key | A function key is held or stuck. Make sure nothing presses on the keypad (on the 400/600, tap F1 rather than holding it to enter Configuration mode) and reset; persistent failures mean the keypad / display module. |
| 31.5 | Stuck Touch | Touch screen reports a constant touch (700…1500 terminals). Remove anything pressing on the screen, including a damaged anti-glare overlay, and reset; persistent failures mean the display module. |
Show 5 more codes
| 32 | Battery Test | Battery failure (700…1500 terminals). Fit a new battery; if it persists, the fault is on the logic module. |
| 33.5 | NVRAM Access | Nonvolatile memory failure (700…1500 terminals); upgrade system firmware to 3.10.03 or later. |
| 3a | Stuck Touch | Touch screen reports a constant touch (400/600 terminals). Remove anything pressing on the screen, including a damaged anti-glare overlay, and reset; persistent failures mean the terminal. |
| 40 | EXE Check | System OS firmware is missing or corrupt; reload firmware. |
| 50 | External CF | Error loading OS firmware from the external CompactFlash card. |
Status indicator states if the terminal stops during start-up
| Indicators | State | What it indicates |
|---|---|---|
| Fault blinking · Comm off | Last firmware download failed | Recoverable: reload the firmware with the Firmware Upgrade Wizard. |
| Fault blinking · Comm blinking | Boot loader firmware failed or missing | Recoverable: reload the firmware with the Firmware Upgrade Wizard. |
| Fault blinking · Comm on | Windows CE OS firmware failed or missing | Recoverable: reload the firmware with the Firmware Upgrade Wizard. |
| Fault on · Comm off | Fatal hardware error | Hardware fault in the logic module (700…1500) or the terminal's logic board (400/600). |
| Fault on · Comm blinking | Fatal hardware error in display | Hardware fault in the display module (700…1500) or the terminal's display section (400/600). |
Where the manual's only remedy for a code is to replace the unit or module, the code is pointing at a hardware fault inside that part. Those are the faults NJT Automation repairs at component level, so a repair quote is usually the first thing to check before buying a replacement.
Source: Rockwell Automation publication 2711P-UM001, PanelView Plus Terminals User Manual. Codes are listed as documented; fault behaviour can vary by firmware revision, so confirm against the manual for your unit's series.
Photos by NJT Automation; test videos from NJT or network repair technicians.
Still have questions?
Find answers to shipping, warranties, repairs, and more.